Knowledgebase: SFTP (SSH/Secure Shell)
|
Configuring SFTP Server and creating a HOSTKEY Pair in Titan
Posted by - NA - on 16 June 2008 12:24 PM
|
|
|
You can run the standard Titan FTP Server wizard to configure a standard server. Once the server has been created, go to the SFTP/SSH tab for the server and enable SFTP/SSH. You'll need to create a hostkey pair for use by the server. Once this has been completed, you'll need to open port 22 for standard SFTP/SSH. HOW TO CREATE YOUR HOSTKEY PAIR: On your server, you need to create a Host Key Pair that will be used/assigned to the SFTP Server. Use the Host Key Management utility in the Titan Admin console to generate the key pair and to assign it to the Server. You might not need to send it to the client, however, you can if you want to. Just Export the Public Key and send that .pub file to the client. If the client intends on using Public Key Authentication instead of the default Password Authentication, then you will need to configure Titan for Public Key Authentication and the SFTP/SSH client will need to export their Public Host Key and send it to you so that you can import it into Titan. This entire process is outlined in detail in our SFTP/Host Key QuickStart Guide on our website. http://www.southrivertechnologies.com/docs/Quick%20Start%20Guides/Titan%20FTP/QS-Titan_FTP_SFTP_Host_Key_Authentication.pdf | |
 (533 vote(s)) This article was helpful This article was not helpful |
|
Comments (0)